A4-style flattop upper receiver is forged from extra-strong 7075 T6 aluminum, with a 5″ long rail to accept your tactical accessories, including Weaver-style rings. Finished with mil-spec, hardcoat, black anodizing for protection from scratches, mars, and abrasion. Mfg: Egw SPECS: 7075 T6 aluminum, hardcoat anodized, black, matte finish. .250″ (6.3mm) diameter pivot pin holes.
Give your 1895 Guide Gun an extremely durable sight that withstands the toughest hunting and field use. Sturdy steel wings protect the rear sight body from damage. Windage and elevation adjustable, ghost-ring rear furnished with .191″ and .230″ diameter apertures. One-piece front post and base has highly visible, .100″ wide, white line, front post. Mfg: Xs Sight Systems SPECS: Steel, black, matte finish. 1895 – fits Model 1895 with .700″ and 1.00″ c-to-c front ramp screws. .300″ high front blade.
All metal construction Hard coat anodized finish Easy to install Clamps to side rail 4 attaching Allen head screws Fully adjustable for height and distance Attaches either left or right side of stock Fits forward folding stocksThe problem with most folding stocks is there is no comb to rest your face against for stability and proper shooting grip. The Samson AK47 Cheek Rest has an answer for proper long gun face weld and better accuracy without giving up the convenience and compactness of the forward folding AK-47 stock that we love so well. The Samson cheek rest is made of metal with a hard coat anodized finish to resist corrosion. It is easy to Mfg: Samson Manufacturing Corp SPECS: Metal construction, Hard coat anodized finish, Easy to install, Clamps to side rail, 4 attaching Allen head screws, Fully adjustable for height and distance, Attaches either left or right side of stock, Fits forward folding stocks.
The absolute easiest way to do a Winchester 70 trigger job. Say “Goodbye” to those long, heavy, glitchy, factory trigger pulls on both Pre- and Post ’64 Winchester Model 70 rifles with this drop-in replacement. Cast and machined trigger unit uses the factory safety; fully adjustable for sear engagement, weight of pull and overtravel from 10 ounces to 4 pounds. Mfg: Rifle Basix SPECS: Steel, polished silver finish. .340″(8.6mm) wide shoe. Includes instructions, adjustment screws, locknuts, and lubricant.
Easy-to-install kit replaces factory parts to eliminate trigger pre-travel and roughness for a clean, crisp, custom pull with little or no gunsmithing. Adjust the setscrew in the sear with the included Allen wrench to take up pre-travel, then lock screw in place with your favorite thread locking adhesive. Sear and hammer geometry is custom designed to produce a lighter pull and a smoother trigger return. EDM machined from A2 tool steel and heat treated to Rc 5658, with precision-ground engagement surfaces vapor honed for smoothness. Some guns may require minor fitting for correct engagement of safety, described in the detailed instructions. Hammer/sear sets are produced as matched pai Mfg: Power Custom SPECS: Steel, in-the-white. Sear Kit – Includes sear, disconnector/sear spring, 2 sear shims, trigger pivot pin, cheater pin. Hammer & Sear Kit – Includes Sear Kit contents plus extra-power hammer spring, 2 hammer shims, replacement trigger return spring. Complete installation ins
High-impact molded polymer vertical grip clamps securely to a Picatinny forend rail to help you control recoil and point the rifle faster. O-ring sealed internal storage compartment is watertight to a depth of 66 feet. No tools required to install and remove-just slide on the rail and screw in the storage compartment to lock the grip in place. Full-Size model provides a large grasping area for maximum recoil control with plenty of room inside for a spare bolt, firing pin, batteries, or other items. Low profile Compact model can stay on the gun during storage in tight gun cases. Mfg: Pro Mag SPECS: Reinforced, molded polymer, black. Full-Size extends approximately 4.6″ (11.7cm) below rail. Compact extends approximately 3″ (7.6cm) below rail.
Stripped, A3-style upper receiver is precision machined from a 7075 T6 aluminum alloy forging to USGI dimensions, ready to mate with the mil-spec lower and internal components of your choice. Includes M4-type feed cuts and alphanumeric position markers stamped into the rail slots. Extra hard 7075 T6 alloy offers superb strength to handle the battering of thousands of firing cycles. Hardcoat anodized to resist wear, add strength, and protect from corrosion. Hard dry-lube surface treatment protects the anodizing from scuffs and reduces friction between bolt carrier and receiver walls for ultra-smooth operation, less wear, and longer service life. Matte black finish matches most factory upper r Mfg: D.S. Arms SPECS: 7075 T6 aluminum, hardcoat anodized, dry-lube finish, matte black. .250″ takedown/pivot pin holes.
.375″ high blade lets you zero the Model 96 Swede and others to point of aim. Square post blade gives an easy-to-see, well defined sight picture with issue rear sights. Plenty of extra material so you can file and shape the blade to original contour or a custom shape. 5.26mm dovetail fits the Mauser front sight base. Fits most Mauser 91 through 98 rifles with military sight base. Mfg: Brownells SPECS: Steel, blued, matte finish. .077″ (1.9mm) wide, .375″ (9.5mm) high above 81deg x .207″ x .081″ dovetail. May require minor fitting.
Round thumb pad gives fast, positive operation; especially important when wearing gloves. Rolls easily under your thumb for faster application or release. Mfg: Rock River Arms SPECS: 4140 steel, black, matte finish. For semi-auto AR-15 only.
High-quality barrels improve accuracy while maintaining the mil-spec look and feel. Front sight tower and barrel nut are pre-installed for ease of installation (sight post, spring and detent must be purchased separately). Each barrel is stress relieved, headspaced and phosphate finished, ready to fit to your rifle. Button rifled with versatile 6 groove, 1-9″ twist to stabilize a wide range of bullet weights. All, except BL-11-M4 and BL-AP4, are heavy barrel contour, turned to .960″ diameter under the handguards, with bayonet lug and 1/2″-28 threaded muzzle. BL-10P and BL-11P have crowned muzzle and no bayonet lug. Carbine-style BL-11-M4 is .640″ diameter under handgu Mfg: Dpms Firearms Llc SPECS: 4140 chrome moly steel. Matte dark gray manganese phosphate Parkerized finish. BL-10/BL-10P 20″ (50cm) long. BL-11/BL-11P/BL-11-M4 16″ (40cm) long. BL-12B 11 1/2″ (29.2cm) long, uses standard carbine length handguard and gas tube. BL-AP4 – 14 1/2
