Dpms Firearms Llc Base Windage Knob Screw, Rear
| () |
|---|
We found a great deal on the Dpms Firearms Llc Base Windage Knob Screw, Rear for only $3.99 at Brownells.
Mfg: Dpms Firearms Llc
Archive
Author Archive
Dewey Ar-15/M16 Elevation Knob
| () |
|---|
We found a great deal on the Dewey Ar-15/M16 Elevation Knob for only $5.99 at Brownells.
Genuine AR-15/M16 parts made to military specifications by a government contractor. These often- replaced parts are supplied in individual bags. Mfg: Dewey SPECS: Knobs, aluminum.
Duostock Designs M4/Car-15 Tactical Buttstock
| () |
|---|
We found a great deal on the Duostock Designs M4/Car-15 Tactical Buttstock for only $89.99 at Brownells.
Molded polymer stock provides maximum comfort, speed, and freedom of movement for operators wearing body armor in CQC situations. Same topside contours as a standard M4 carbine stock allow the shooter to maintain a solid cheekweld when firing, but overall length is slightly shortened to maintain correct length of pull. The deeper, curved underside is angled so the lower tip rides comfortably on the upper chest or collarbone in a forward, high carry position near the dominant eye; keeps the sights and barrel close to the line of sight, ready to be engaged with minimal head movement. Forward carry also provides better armor protection than the traditional angled stance that leaves the vulnerab Mfg: Duostock Designs SPECS: Impact-resistant polycarbonate, black. 6 1/4″ (15.9 cm) OAL, 6-7/8″ (17.5 cm) high. Universal fits M4/CAR-15 carbine buffer tubes. Colt fits Mil-Spec M4 tubes.
Bat Machine Ar-15/M16/Ar-Style .308 Barrel Extension
| () |
|---|
We found a great deal on the Bat Machine Ar-15/M16/Ar-Style .308 Barrel Extension for only $30.99 at Brownells.
Machined 4140 chrome-moly steel barrel extensions help the custom rifle builder ensure a secure barrel fit for best alignment and accuracy. Heat treated for surface hardness to give years of reliable service. Choose from a standard AR-15 rifle extension or an M4 carbine extension with feed ramp cuts. The .002″ oversized AR-15 extension provides an extra-tight receiver fit that reduces vibration and improves accuracy, or solves the problem of a slightly loose, out of spec receiver. AR-Style .308 extension fits the DPMS LR-308 and other .308s with the same thread pattern, plus it offers M4-style feed ramp cuts to ensure extra reliability in getting rounds from the magazine to the chamber. Mfg: Bat Machine SPECS: 4140 chrome-moly steel, in-the-white. Standard AR-15 – 998″ O.D., .750″ I.D. No feed ramp cuts. Oversize AR-15 – 1.000″ O.D., .750″ I.D., with M4-type feed ramp cuts. M4 – 1.000″ O.D., .750″ I.D., with feed ramp cuts. AR-Style .308 -1.200″ O.D., .940″
Smith Enterprise Ar-15/M16 Direct Connect Compensator
| () |
|---|
We found a great deal on the Smith Enterprise Ar-15/M16 Direct Connect Compensator for only $69.99 at Brownells.
Easy to install compensator substantially reduces felt recoil and muzzle flip for smooth shooting, better control, and improved accuracy. Screws directly to any barrel with standard 1/2″-28 tpi muzzle threads no crush washer or peel washer required. Twelve recessed gas ports redirect combustion gases to counteract recoil force. Made from the same 8620 steel bar stock as the popular Vortex Flash Eliminator, and heat-treated to a surface hardness of Rc 60 to resist gas erosion. Rounded edges give a streamlined profile and minimize risk of snagging on other gear. Accepts Smith Enterprise quick-detach sound suppressors. Mfg: Smith Enterprise SPECS: 8620 steel, Parkerized, matte black finish. 25/16″ (5.9cm) long, .860″ (2.2cm) dia. 3.4 oz. (97g) wt. Fits 5.56mm/.223 barrels with 1/2″-28 tpi threaded muzzles. No washers required.
T G E Inc. Ruger~ M77 Triggerguard
| () |
|---|
We found a great deal on the T G E Inc. Ruger~ M77 Triggerguard for only $45.99 at Brownells.
High-quality, machined aluminum triggerguard replaces the original pot-metal factory part and adds years of service life to your rifle and an attractive appearance. Drop-in fit for early model, tang safety, Ruger M77 short and long actions Anodized matte black to match the original finish. Available as a complete trigger guard assembly with installed magazine push-button release and spring, or trigger guard only, for use with the original magazine release and spring. Requires original triggerguard screws. Mfg: T G E Inc. SPECS: 6061 T6 aluminum, anodized finish, matte black. 33/8″ (8.5cm) long x 5/8″ (1.6cm) wide. Assembly includes steel magazine release and spring, blued, matte finish. Fits long and short action Ruger M77 with tang safety.
High Standard Hammer Spring
| () |
|---|
We found a great deal on the High Standard Hammer Spring for only $2.99 at Brownells.
HAMMER SPRING Mfg: High Standard
Browning Forearm Escutcheon
| () |
|---|
We found a great deal on the Browning Forearm Escutcheon for only $6.99 at Brownells.
FOREARM ESCUTCHEON Mfg: Browning
Xs Sight Systems Ar-15/M16 High Visibility White Line Front Post Sight
| () |
|---|
We found a great deal on the Xs Sight Systems Ar-15/M16 High Visibility White Line Front Post Sight for only $30 at Brownells.
Draws your eye to the sight and increases contrast on dark targets. Double-faced, 30deg angle blade offers 2.5 MOA elevation per click. .080″ wide version for improved accuracy at long range, .100″ wide version is faster to acquire at close range. Mfg: Xs Sight Systems SPECS: Stainless steel, black, matte finish. Includes sight adjustment tool. .080″ (2mm) or .100″ (2.5mm) wide post. .030″ (7.6mm) wide, white stripe, square top.
Brownells Ar-15 Extractor Buffer
| () |
|---|
We found a great deal on the Brownells Ar-15 Extractor Buffer for only $13.99 at Brownells.
Tough, dense rubber insert replaces factory buffer inside the extractor spring to prevent “extractor bounce” that can occur in rapid-fire conditions. Insert keeps the extractor from losing contact with casings and reducing faulty ejection of the spent casing. Sold in 10-paks. Mfg: Brownells SPECS: Rubber, black. .15″ (3.8mm) long, .11″ (2.8mm) diameter 10-paks.
