We found a great deal on the Tech Sights, Llc. Gi Type Aperture Sights For 10/22 for only $59.99 at Brownells.

8″ longer sight radius Rear sight base mounts solidly to rear receiver Rear sight uses existing tapped scope base holes TSR100 comes with dual aperture, works with AR15/M16 apertures TSR200 allows for additional elevation adjustment at the rear sight Uses incremental windage adj. with rugged detent Front sight comes standard with incremental detent Front sight has adjustable AR15 type post Front sight post is compatible with AR15/M16 posts All steel front sight assembly Rear sight base is hard coat anodized black aluminum Mfg: Tech Sights, Llc.

Click Here to Buy Now

We found a great deal on the Dpms Firearms Llc Ar-Style .308 Buttstocks for only $69.95 at Brownells.

Six-position, adjustable-length stock provides the advantages of the USGI M4 carbine stock, with added comfort and reliability enhancements. Four integral slots, plus a steel toe-mounted sling loop, provide a wide array of options for mounting 1 1/4″ wide slings. A reinforced latch pin and ergonomically shaped latch ensure fast, positive length-of-pull adjustments. Curved integral buttplate with saw-tooth texturing aids secure, non-slip shoulder contact. Comb is wider than standard M4 stock to provide a more secure cheekweld. Constructed of incredibly strong, lightweight, impact-resistant molded DuPont Zytel(R) nylon resin reinforced with fiberglass. Comes with a “commercial Mfg: Dpms Firearms Llc SPECS: Fiberglass-reinforced molded Zytel nylon resin. 8 1/4″ (20.1cm) fully retracted length, 10 1/2″ (26.7cm) fully extended length, 47/8″ (12.4cm) high at buttplate. Fits DPMS Panther LR-308, ArmaLite(R) AR-10(R), Knight SR-25, Patriot Ordnance Factory P-308, a

Click Here to Buy Now

We found a great deal on the Tactical Solutions, Llc Ruger~ 10/22~ Shock Buffer for only $4.99 at Brownells.

Shock-absorbing polyurethane buffer replaces the bolt stop pin to eliminate metal-to-metal contact and extend receiver life. Cushions the bolt’s rearward motion to help prevent receiver cracking, reduce felt recoil, and enable quieter cycling. Mfg: Tactical Solutions, Llc SPECS: Polyurethane, orange tint. Fits 10/22 in .22 LR only.

Click Here to Buy Now

We found a great deal on the Colt Fire Control Kit for only $92.48 at Brownells.

Hammer, trigger, sear, safety, and springs plus .173 diameter pins. Mfg: Colt SPECS: Steel, matte black finish. Fits lower receivers with .173″ diameter pin holes only.

Click Here to Buy Now

We found a great deal on the Harris Gunworks Sako-Style Extractor Kit for only $32.05 at Brownells.

Complete parts kit converts Remington 700 bolts to use a larger, Sako-style extractor which grabs a bigger bite of case rim for increased extractor performance. Mfg: Harris Gunworks SPECS: 17-4 stainless steel extractor. Kit includes extractor, plunger pin and spring. Installation requires machining of bolt.

Click Here to Buy Now

We found a great deal on the Special Ops Tech (So Tech) Sniper Skid Plate for only $29.99 at Brownells.

Durable, double-stitched, 1000 denier Cordura(R) nylon pad with waterproof, rubberized exterior helps prevent slipping on rough, hard surfaces during barricade shots. Deep, horizontal washboard design cushions and protects your guns forend, plus the extra thick padding helps absorb and counter recoil for fast, accurate follow-up shots. Two longitudinal hook-and-loop straps provide a tight hold to the forearm with absolutely no movement under recoil. Installs and removes in just seconds. Available in small (A3) and large (A5) sizes. Mfg: Special Ops Tech (So Tech) SPECS: 1000 denier Cordura(R) nylon, black. A3 Small – 5 1/2″ (14cm) long, 3 3/4″ (9.5cm) wide, 1/4″ (6.4mm) thick. A5 Large – 7-1/8″ (18.1cm) long, 6-1/8″ (15.6cm) wide, 1/4″ thick.

Click Here to Buy Now

We found a great deal on the Brownells Car-15/M4 Flip-Up Tactical Sight Sets for only $159.99 at Brownells.

Rugged flip-up sights provide instant backup when primary sight fails or weather conditions limit its use. Robust cross-bolt with oversized, slotted hex nut locks clamping block tightly to Picatinny accessory rail for zero sight movement. Clean, low profile design won’t snag on other gear when folded down. All models regulate with mil-spec A2 carbine sights or same-height aftermarket sights-perfect for co-witnessing with non-magnifying red dot and holographic optical sights. Precision machined from hardcoat anodized 6061 T6 aluminum and heat-treated 4140 steel for repeatable settings and the strength to handle the rigors of combat. A2 windage knob on rear sights provides precise Mfg: Brownells SPECS: 6061 T6 aluminum and 4140 steel, matte black. Standard Rear & Tritium Rear Sight – 1-3/8″ (3.5cm) overall length, 1-7/8″ (4.8cm) high (extended), 7/8″ (2.2cm) high (folded). 360 Series Rear – 1-3/8″ overall length, 1-7/8″ high (extend

Click Here to Buy Now

We found a great deal on the Williams Gun Sight 5d Economy Receiver Sights for only $41.99 at Brownells.

Same dependable, accurate construction as Foolproof but without micrometer adjustments. Windage and elevation adjustments easily made by loosening screws, moving sight and re-tightening screws. Stop screw provides accurate guide so 5D will return to absolute zero upon detaching and reattaching. Standard hole spacing for easy, secure mounting.5D-SH Model fits Benjamin 340, 342, 347 (need higher front sight); Sheridan Model C.5D-JEMS Model fits Daisy 99 & 299; Enfield 1917 & Br 14; JAP Type 38 & 99; Mauser 98; Remington 700 Left Hand; Springfield ’03.5D-94/36 Model fits Higgins 30/30 Lever; Marin 36 & 336, 94, .44 Mag & 44; Sears 30-30 Lever; Winchester 9422, 64 & 94.5D-12/3 Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized. Steel screws.

Click Here to Buy Now

We found a great deal on the Tangodown Bg-17 Rifle Grip for only $36.99 at Brownells.

Same construction as the BG-16 with ergonomics that fit larger-handed shooters. A single large internal storage compartment holds batteries, small spare parts, or supplies. Includes stainless steel, Dry-Lok attaching screw and installation tool. Mfg: Tangodown SPECS: Resin-impregnated polymer, Black or Dark Earth. 4 1/2″ (11.4cm) high. Base 23/8″ (6cm) long, 1 1/4″ (3.2cm) wide. Fits AR-15/M16/M4 series rifles and clones, and other rifles that accept an A2 grip, including ArmaLite(R) AR-10(R), FN SCAR Mk-16/Mk-20, and Knig

Click Here to Buy Now

We found a great deal on the Brownells Remington 700 Ml Breech Plug for only $19.99 at Brownells.

If your 700 ML has been sidelined by a badly corroded or damaged breech plug, get it back in the field with this high-quality replacement for the discontinued factory part. Our drop-in replacement is machined from tough, 416 stainless steel for superior corrosion resistance and years of reliable service. Mfg: Brownells SPECS: 416 stainless steel, natural finish. Fits Remington 700 ML muzzleloaders.

Click Here to Buy Now

We found a great deal on the Power Custom Ruger~ 10/22~ Competition Trigger Parts for only $117.99 at Brownells.

Drop-in, EDM machined parts provide improved performance at a fraction of the cost of expensive hand fitting. Everything you need to produce a light, crisp trigger for the 10/22. EDM matched hammer and sear, overtravel adjustable aluminum trigger, two hammer and two trigger shims, extra power hammer spring, extra power disconnector spring and extra power trigger return spring. Recoil buffer included. Mfg: Power Custom SPECS: Black aluminum trigger. Other parts, steel, matte blue finish. Heat treated to Rc 56-58. Includes assembly pin and instructions.

Click Here to Buy Now

We found a great deal on the Tactical Components, Llc. Mag-Xtender For Weatherby/Howa for only $20.95 at Brownells.

Impact-resistant, cartridge tray extends your rifle’s magazine capacity by replacing the factory floorplate. Injection-molded from high-strength, 60% glass-reinforced nylon for superior durability and reliable function in all conditions. Drop-in fit, requires use of your factory magazine spring, follower, and hinge pin. Short Action model increases the standard magazine capacity of .223-based calibers up to nine rounds. Removable cartridge stop lengthens the tray to accept .308-based cartridges, and increases magazine capacity from four to seven rounds. Long Action model increases the standard magazine capacity of .30-06-based calibers from four to five rounds. Models available for Rem Mfg: Tactical Components, Llc. SPECS: Glass-reinforced nylon, black. Rem. 700 – Short Action: 3-5/8″ (8.6cm) long, 1″ (2.5cm) wide, 3/4″ (1.9cm) high. Long Action: 4-5/8″ (12cm) long, 1″ wide, 1-1/8″ (3cm) high. Weatherby Vanguard/Howa – Short Action: 3-1/8″ (7.9c

Click Here to Buy Now

We found a great deal on the Dpms Firearms Llc A2 Flash Suppressor for only $8.99 at Brownells.

Machined steel, five-port flash suppressor effectively controls muzzle flash to minimize shooter exposure in both daytime and low-light situations. Ports are located along the top of the suppressor and bottom is solid to reduce dust printing when shooting prone. Mfg: Dpms Firearms Llc SPECS: Machined steel, matte black. 1.75″ (4.4cm) long, 7/8″ (2.2cm) O.D. 1/2″-28 tpi. Requires peel washer (not included) for proper indexing.

Click Here to Buy Now

We found a great deal on the Brownells Ar-15/M16 Tactical Charging Handles for only $32.99 at Brownells.

Easy-to-build kits contain all the components needed to assemble a tactical charging handle that aids in fast action drills, efficient jam clearing, and smooth operation. All kits are built around a stripped DPMS factory charging handle machined to stringent mil-spec standards for proper fit and dependable function. Each kit also comes with latch spring and roll pin. Badger kit features an oversized latch that’s easy to find and operate with the left hand. Badger GEN II kit comes with a mid-sized latch for those seeking a larger grasping surface that won’t interfere with optics. M&A Ambi kit includes a large, extended latch lever that’s easy to grab and allows rapid ope Mfg: Brownells SPECS: Aluminum charging handle, matte black finish. Badger Steel latch, matte black. Latch approx. 1 1/2″ (3.8cm) long, 5/8″ (1.6cm) high. Badger Gen II Steel latch, matte black. Latch approx. 1 1/4″ (3.2cm) long. M&A Ambi Aluminum latch, mat

Click Here to Buy Now

We found a great deal on the High Standard Firing Pin for only $10.99 at Brownells.

FIRING PIN Mfg: High Standard

Click Here to Buy Now

We found a great deal on the Hogue 10/22~ Overmolded? Rifle Stock for only $96.99 at Brownells.

Cushioned rubber or nylon outer skin provides non-slip, shooting comfort; internal fiberglass body gives solid support, is lightweight and easy to carry. Fully-inletted for a drop-in fit; models available to fit either factory standard barrels (S/B) or nominal .920″ diameter bull barrels (B/B). Straight comb; wide, varmint-style forend with finger grooves, cobblestone finish on grip and forend; dual palm swells and recurve pistol grip make this stock as comfortable to shoot as it is practical. Includes rubber recoil pad, and front and rear sling studs. Mfg: Hogue SPECS: Fiberglass with Nylon or Rubber covering, black. 29″ (73cm) long, 13 3/4″ (35cm) length of pull, 1 1/4″ (2.8cm) drop at heel, 1.9 (.86kg) wt. fits Ruger 10/22.

Click Here to Buy Now

We found a great deal on the Wolff Remington 700/721/722 Trigger Spring for only $3.49 at Brownells.

Give your Remington bolt rifle a performance lift with these easy to install springs. Reduced power (RP) trigger spring helps lower felt trigger pull for better, more consistent accuracy. Mfg: Wolff SPECS: Spring steel. Fits Rem. 700/721/722.

Click Here to Buy Now

We found a great deal on the The Mako Group Ar15/M16 Recoil Reducing Stock for only $96.55 at Brownells.

5 sling attachment points Storage compartment for batteries or parts Mil-spec reinforced polymer composite Fits any weapon that accepts M-4/AR15 style stocks Patented system reduces recoil and muzzle rise for improved control during rapid and full auto fire Mfg: The Mako Group SPECS: Recoil-reducing collapsible stock, Fits AR-15 style rifles, 5-sling attachment points, 2 QR attachment points, Battery compartment, Rubber buttstock.

Click Here to Buy Now

We found a great deal on the Remington Magazine Follower for only $25.01 at Brownells.

MAGAZINE FOLLOWER Mfg: Remington

Click Here to Buy Now

We found a great deal on the Jard Ruger M77 Mkii & 77-22 (77/17) Trigger Kits for only $88 at Brownells.

Reliable, easy-to-install, upgrade kits replace some or all of the factory trigger components to deliver match-grade performance in your rifle. Specially designed, system (except Mauser 98) moves the sear engagement point to a precise location for more leverage that lightens pull weight. Fewer working parts help eliminate malfunctions caused by moisture and freezing temperatures. Precision machined and polished engagement surfaces help minimize drag for smooth, crisp let-off. All models use the factory safety without alteration. Drop-in installation. Polished sear and trigger lever, plus a reduced power return spring smoothes trigger movement and lightens pull to 2 pounds. Adjustments for se Mfg: Jard SPECS: Steel, black matte or polished silver finish. 2 lb. pull weight. MK II – Fits Ruger M77 Mark II. Will not fit Target (VT) models. 77/22 & 77/17 – Fits Ruger 77/22, 77/22 WMR, and 77/17.

Click Here to Buy Now

We found a great deal on the Brownells Oversized Tactical Bolt Knob for only $23.99 at Brownells.

Oversized bolt knob is easy to grab for quick, unencumbered bolt cycling on tactical and benchrest rifles. Features a tapered, palm-fitting design for additional leverage when clearing hard to remove stuck shells. CNC machined from lightweight aluminum and finished with Brownells Gun-Kote(TM). Installation requires threading of original bolt handle. Available in matte black, matte green, and natural finish. Mfg: Brownells SPECS: 6061 T6 aluminum, matte black, matte green, or natural finish. 1-17/32″ (3.9cm) long, .990″ (25.2mm) diameter. 1.3 oz. (35 g) weight. Gunsmith installation recommended.

Click Here to Buy Now

We found a great deal on the Browning Forearm Swivel Eyelet & Nut for only $18.99 at Brownells.

FOREARM SWIVEL EYELET & NUT Mfg: Browning

Click Here to Buy Now

We found a great deal on the Armament Dynamics Industries Ar-15/M16 Aclm? Ambidextrous Charging Handle for only $84.99 at Brownells.

Fully ambidextrous charging handle lets the operator charge the weapon from any position for a critical tactical advantage that can make the difference between winning or losing in competition or combat. Helps you maintain peak readiness, clear jams quickly, and operate the handle even if the strong hand is incapacitated. The standard factory handle requires two separate motions: releasing the latch on the left side of the hand grip, then pulling back on the grip to retract the bolt. The Advanced Combat Latching Mechanism (ALCM(TM)) requires only a single, intuitive, continuous backward pull-easier to perform under stress. Simply grasp the handle from either side with either hand, a Mfg: Armament Dynamics Industries, SPECS: Aluminum, hardcoat anodized, matte black finish. Fits .223/5.56mm AR-15/M16/M4 and related weapons.

Click Here to Buy Now

We found a great deal on the Spikes Tactical Ar-15/M16 Buffer Spacer for only $26.95 at Brownells.

FEATURES: Allows for carbine buffers and springs to be used in rifle length buffer tubes Works with A1/A2 buffer tubes Machined aluminum billet cylinder Black anodized finish Spike’s tactical spider logo etched on end of cylinder Does not add buffer weightBENEFITS: Allows for the use of existing carbine buffers and springs in a rifle length stock, no need to purchase a new buffer and spring Spike’s tactical ST buffers can now be used in a rifle length system Spacer is easily removed and installed, no gunsmithing required Solid aluminum construction and tough anodizing ensure that this spacer will last Mfg: Spikes Tactical

Click Here to Buy Now

We found a great deal on the Brownells Ar-15/M16 Custom Components Kits for only $59.99 at Brownells.

Includes ejection port cover, oversized magazine release, and extended takedown pins Each component is custom etched Allows you to personalize your AR with easily installed components Mag releases are enlarged for easy operation Takedown pins are extended for simple removal Zombie Hunter kit contains Zombie Hunter ejection port cover and biohazard mag release and takedown pins Join or Die kit contains Rifleman’s Creed ejection port cover and American Flag mag release and takedown pins Don’t Tread on Me kit contains Don’t Tread on Me ejection port cover and American Flag mag release and takedown pins Mfg: Brownells SPECS: Ejection Port Cover – 1045/1055 cold-rolled carbon steel, Parkerized, black. Fits standard .223/5.56mm AR-15 upper receivers. Ejection cover latch detent and spring installed; hinge pin, spring, snap ring required (sold separately). Not for use on Rock River Arms 9mm or Uramex .22 LR. Oversiz

Click Here to Buy Now

We found a great deal on the Blackheart International, Llc Custom Bolt Action Receiver for only $1399.99 at Brownells.

Rugged, tactical action is an update of the popular, proven Remington 700 action, and is ideal for building a custom long range sniper, competition, or hunting rifle. Cut for a mag well, accepts aftermarket 700 parts, and fits any stock inletted for the factory 700 action, giving you a huge range of customizing options. Machined from billet 416R stainless steel then hardened to Rc 41, with bolt rails wire-EDM cut to maintain the exact tolerances needed for smooth bolt operation. Spiral fluted bolt maintains 0.004″ to 0.006″ of clearance in the bolt bore, with a straight bolt handle and oversized, knurled tactical knob. Receiver is drilled and tapped to accept the included, one-piec Mfg: Blackheart International, Llc SPECS: Receiver/Bolt – 416R stainless steel, hardened to Rc 41. Shroud/Bolt Knob – Aluminum, anodized matte black. Trigger pins included. Requires Rem 700 type trigger, magazine well and bottom metal. Includes one-piece 20 MOA Picatinny aluminum rail, four 8-40 mounting scr

Click Here to Buy Now

We found a great deal on the Browning Extractor for only $60.48 at Brownells.

Mfg: Browning

Click Here to Buy Now

We found a great deal on the Jard Savage Trigger Upgrade Kit for only $85.99 at Brownells.

Upgraded trigger lever and sear feature ultra-smooth engagement surfaces for a 16-ounce, cleaning breaking trigger pull. Adjustable sear engagement and over travel allow fine-tuning. All models use the factory safety without alteration. Drop-in installation. Mfg: Jard SPECS: Steel, matte black finish. 1 lb. pull weight.Fits Savage centerfire rifles.

Click Here to Buy Now

We found a great deal on the Advanced Technology Rem 7600 Series Pistol Grip Buttstock for only $57.99 at Brownells.

Convert your Remington 7600 Series semi-auto or pump rifle into a fast pointing tactical rifle just by changing the buttstock. Ergonomically designed, full-length stock with an integral, pebble-textured pistol grip provides maximum control and pointability for improved accuracy. Recoil absorbing, synthetic rubber recoil pad assures shooting comfort. Stock is made in the U.S. from virtually indestructible fiberglass-filled, synthetic nylon material and includes a lifetime warranty. Mfg: Advanced Technology SPECS: Black, injection-molded synthetic nylon. 14 1/2″(36.8cm) length of pull. 1 lb. 5 oz. (.6kg) wt. Includes steel sling swivel stud and stock bolt bushings to fit the following models: Remington 7600, 760, 740, and 7400 Pump Action and Semi-Auto Rifles in all calibers. Uses factory sto

Click Here to Buy Now

We found a great deal on the Sierra Precision Ar-15/M16 Spr Pistol Grip for only $27.95 at Brownells.

Repositions the hand for a comfortable grasp and improved trigger finger location. Hand filling design with thumbrest and palmswell provide enhanced gripping endurance. Matte surface gives good, non-slip purchase. Mfg: Sierra Precision SPECS: Black, glass filled Polypropylene, matte finish. Fits AR-15, AR-10 and AR-25 rifles. Right-hand only.

Click Here to Buy Now

We found a great deal on the Falcon Industries Universal Accessory Mounting Platform for only $11 at Brownells.

Injection-molded, nylon-based, polymer platform installs easily on tube and conventional two-piece AR-15 handguards, plus rifle and shotgun forends to mount lights, lasers, and tactical gear. Six mounting holes and lots of slots make it adaptable to different situations. Comes complete with three mounting screws and flat nuts. Accepts picatinny and Weaver-style accessories. Mfg: Falcon Industries SPECS: Injection-molded polymer, black. 5-5/8″ ” (14.3cm) OAL.

Click Here to Buy Now

We found a great deal on the Tti Intl Ar-15/M16 Pins for only $1.99 at Brownells.

Genuine, Mil-spec quality small pins for the AR-15/M-16 that wear out, break, or just get lost. Great for creating your own emergency parts kits. Mfg: Tti Intl SPECS: Parts sold 5 per pack.

Click Here to Buy Now

We found a great deal on the Brownells Marlin Lever Action Quick Takedown Screw for only $19.99 at Brownells.

Oversized, steel takedown screw allows easy lever removal for a thorough cleaning, plus makes quick work when swapping standard levers for large loop levers for cowboy action shooting. Large diameter, knurled head provides a non-slip grasp during installation and removal. Replaces the original, factory lever screw without alteration. Mfg: Brownells SPECS: Steel, blued, matte finish. 12-28 NF male thread. Fits Marlin 336, 1894, 1895, 30AS, and 30AW lever action rifles.

Click Here to Buy Now

We found a great deal on the Kns Precision, Inc. Ar-15/M16 Non-Rotating Pin Set for only $29.99 at Brownells.

Redesigned hammer pin and anti-rotation links provide the strongest possible system to eliminate pin rotation, and will withstand the additional force exerted by 9mm conversions and suppressed .223 upper receivers. Helps prevent wear to receiver holes, which is especially important for increasingly-valuable M16 and pre-ban receivers. Notched hammer pin locks into slots in the anti-rotation links; trigger is secured with locking screws, and includes lube ports so adequate lubrication reaches the trigger. Anti-rotation links fit on the outside of the receiver to prevent all movement. Pins are CNC-machined, centerless ground for uniformity and heat treated for durability. Available in Standard Mfg: Kns Precision, Inc. SPECS: 416 stainless steel pins. .900″ (22.8mm) long, .154″ (3.91mm), .155″ (3.93mm), or .170″ (4.31mm) diameter. Set includes (1) hammer pin, (1) trigger pin, (2) screws, (2) anti-rotation links, hex wrenches, and installation tool. Anti-Rotation Links – Steel, Parkerized

Click Here to Buy Now

We found a great deal on the Nu-Line Winchester 100 Gas Piston for only $49.95 at Brownells.

Returns Winchester 100 semi-autos to safe operating condition. Replaces worn, corroded or rusted pistons; improves gas seal, delivers reliable cycling. Mfg: Nu-Line SPECS: Steel. Matte finish. 5.125″ (13cm) long.

Click Here to Buy Now

We found a great deal on the Beretta Usa Storm Long Alum Side Rail, Cx4 for only $37.14 at Brownells.

STORM LONG ALUM SIDE RAIL, CX4 Mfg: Beretta Usa

Click Here to Buy Now

We found a great deal on the Brownells High Standard Upper Parts Kit/Ff Rifle Handguard for only $57.99 at Brownells.

High Standard Upper Parts Kit includes ejection port cover, ejection cover hinge pin, ejection cover hinge clip, ejection cover spring, forward assist plunger, forward assist retaining pin, forward assist spring, 20″ gas tube, gas tube roll pin, flash hider washer and peel washer. Mfg: Brownells

Click Here to Buy Now

We found a great deal on the Power Custom Ruger(R) 10/22(R) Extended Bolt Handle for only $53.58 at Brownells.

Extended bolt handle of lightweight titanium has a long, curved shape that’s easy to grab when charging or clearing the chamber. Hardened, polished, drill rod spring guide includes a 4 oz. extra-power spring for faster, smoother cycling and improved feeding with all ammunition types. Available with Solid or Skeletonized handle for further weight reduction. Replacement spring available separately. Mfg: Power Custom SPECS: Titanium handle, steel spring guide, silver matte finish. 1 1/4″ long grasping surface. 4 1/4″ (10.8cm) long spring guide. Solid – .8 oz. (23g) wt. Skeletonized – .6 oz. (17g) wt.

Click Here to Buy Now

We found a great deal on the Cmmg Ar-15 .204 Ruger Upper Receiver for only $749.95 at Brownells.

Upper receiver: A3 24-inch stainless barrel and free floating handguard Heavy profile barrel is ideal for varmint hunting or extended range sessions M4 feed ramps Flash hider Upper is complete with a bolt and semi-auto bolt carrier Low profile gas blockThe CMMG AR15 .204 Ruger 24-inch Upper Receiver is ideal for extended range sessions or varmint hunting. It features a 24-inch stainless barrel and free floating handguard, 4140 stainless steel barrel with a 1 in 9-inch twist with a recessed 11-degree target crown. The upper receiver is a forged M4 with extended feed ramp cuts and T-marks on the rail slots. It also features an upper with a complete bolt Mfg: Cmmg SPECS: A3 upper receivere, 24-inch barrel, Free floating handguard, M4 feed ramps, Flash hider, Low profile gas block.

Click Here to Buy Now

We found a great deal on the Power Custom Ruger~ 10/22 .17 Rimfire Heavy Bolt Handle for only $59.99 at Brownells.

Dense, tungsten core provides the added weight required to slow bolt speed for safe and reliable function of higher pressure, .17 rimfire cartridges in converted 10/22 rifles. Keeps bolt closed longer to prevent case ruptures, extractor blowout, and cracked receivers, and is a mandatory part when using the factory .22 rimfire bolt for your conversion. Oversized handle is easy to locate and grasp in the field or during fast paced competition. Precision machined, stainless steel, bolt handle body resists rust and corrosion. Included stainless steel guide rod and Wolff Extra Power bolt spring must be used in .17 Mach 2 conversions; use the factory spring and guide rod when installing bolt Mfg: Power Custom SPECS: Stainless steel body with tungsten core, natural, matte finish. Handle – 1″ (2.5cm) long, .75″ (1.9cm) diameter. 3.1 oz. (87g) weight. Guide Rod – 4 1/4″ (10.8cm) long.

Click Here to Buy Now

We found a great deal on the Green Mountain Muzzleloader Interchangeable Barrel System for only $215.3 at Brownells.

Precision, button-rifled barrels with 1-28″, fast twist provide increased accuracy when shooting saboted or conical bullets. Choose slow, 1-70″, twist for best results when shooting round balls. Interchanges with factory barrel; installs in minutes. Drilled and tapped for the T/C Scope Adapter. Mfg: Green Mountain SPECS: 1137 steel, blue (BLU) matte finish, .50 and .54 cal. 15/16″ across flats. Percussion. Fits: #1 – T/C Hawken (.45/.50 cal.), Pennsylvania Hunter/Carbine, Cabela’s/Investarms Hawken, Lyman Trade, Deerstalker, Carbine.

Click Here to Buy Now

We found a great deal on the E. Arthur Brown Company, Inc. Ruger~ #1 Accurizer for only $59.95 at Brownells.

Stabilizes the barrel to prevent point of impact shift as barrel heats up. Steel bedding block attaches to receiver extension and gives you an adjustable tensioning screw to regulate barrel movement. Only minor inletting of the forearm required. Mfg: E. Arthur Brown Company, Inc. SPECS: Steel, blue finish. 1.28″ (3.2cm) long, .74″ (18.9mm) wide, .51″ (13.2mm) high. Includes instructions.

Click Here to Buy Now

We found a great deal on the Wilson Combat Ar-15/M16 Flip-Up Front Sight for only $146.99 at Brownells.

Rugged, all steel, flip-up front sight (FUFS) provides dependable backup in the event your primary optical sight fails. Designed from the ground up to be exceptionally robust, accurate, and reliable, the perfect match for Wilson’s Flip-Up Rear Sights (FURS). Pushbutton-activated mechanism deploys instantly for immediate use, so you can adapt to quick changes in fluid tactical situations. Minimal profile and weight; folds down out of the line of vision when you don’t need it. Spring-loaded, detent locks positively in the up or down position to further guard against unintentional raising or lowering of sight. Precision-machined from ordnance-grade steel, with a protective “fence” machined into Mfg: Wilson Combat SPECS: Steel, black, matte finish. 2.25″ (5.72cm) long, 2.26″ (5.74cm) deployed height from top of barrel to top of post, .825″ (2.1cm) folded height. Fits .750″ O.D. barrels. Muzzle accessories must be removed to allow installation.

Click Here to Buy Now

We found a great deal on the Gg&G, Inc. Ar-15/M16 Vertical Foregrip for only $34.99 at Brownells.

Lightweight vertical grip clamps securely to Picatinny forend rail to give the operator a more comfortable shooting stance and better weapon control. Helps control muzzle climb during sustained fire for quicker, more accurate follow-up shots, and minimizes hand fatigue when holding weapon in the ready position for long periods of time. Shape is narrow at the top for secure purchase by the thumb and forefinger, with a palm-filling swell at the middle, and wide, deep, concentric ribs around the lower 1/3 of the grip for a comfortable, ultra-secure grasp. Removable core has a large, waterproof storage compartment that can hold a spare bolt assembly, two AA or CR123 batteries, or other small par Mfg: Gg&G, Inc. SPECS: Acetal polymer, matte black. Grip extends 4 3/4″ (12.1cm) below rail. Approx. 1-5/16″ (3.3cm) at widest point. 2.4 oz. (69g) weight.

Click Here to Buy Now

We found a great deal on the Necg Front Sight Hoods for only $25 at Brownells.

For Universal Front Sight Ramps. Use Medium Hood for Medium and Large Hood for High. Window Hood allows more light, must be used with Fiber Optic Beads. Mfg: Necg SPECS: Steel, blue. Dia.; Small – .550″ (14mm), Med. – .630″ (16mm), Large – .709″ (18mm), Window – .630″.

Click Here to Buy Now

We found a great deal on the Dpms Firearms Llc Extractor Pin for only $1.48 at Brownells.

Mfg: Dpms Firearms Llc

Click Here to Buy Now

We found a great deal on the Heavy Buffers Modified Ar10 Buffer Spring for only $12 at Brownells.

Simple drop-in installation Modified AR10 is recommended for maximum reliability Reduces felt recoil Compatible with .308 ARs ranging from: Armalite, DPMS, Remington, Knight’s, LMT, Larue, POF, Mega, Fulton, And CMMGGet the AR10/308AR CAR-10 Buffer. Mfg: Heavy Buffers

Click Here to Buy Now

We found a great deal on the Advanced Technology Ar-15/M16 Strikeforce Stock & Pistol Grip for only $69.95 at Brownells.

Six position, length adjustable stock lets you determine length of pull and benefit from a shorter overall length when the tactical situation dictates. High strength, glass-filled nylon composite stock features a rubber buttpad with a slight negative angle for fast shouldering, especially when wearing body armor. Combat proven design includes an easy-to-operate, spring-loaded release lever for lightening quick adjustments. Cheekrest is adjustable 3/8″ up to provide correct eye alignment with optics for fast target acquisition. When in the full-down position, provides a very comfortable, streamlined stock that works perfectly with iron sights. Includes standard swivel base stud. Installa Mfg: Advanced Technology SPECS: Glass-filled nylon, matte black. 7 1/2″ (19cm) long. 3-7/8″ (9.8cm) maximum extension. 10.3 oz. (292g) weight. Pistol Grip – 4 1/4″ (10.8cm) long x 13/8″ (3.5cm) wide. 4.3 oz. (122g) weight. Installation requires a Commercial (1.17″ O.D.)&nb

Click Here to Buy Now

We found a great deal on the Osprey Defense Ar-15/M16 Ops-416 Gas Piston Conversion Kit for only $329 at Brownells.

Drop-in gas piston conversion kit installs in only five minutes and improves the reliability and function of your AR-15 by eliminating fouling caused by gas venting into receiver. Rifle runs cooler, with less frequent need for cleaning and less wear on carrier and bolt resulting in longer service life from these critical parts. The unique, kidney-shaped cross-section of the piston and piston chamber provides extra mass and surface area to evenly spread out gas pressure and reduce felt recoil, allowing you to stay on target for rapid follow-up shots. Installs in minutes on both semi- or full-auto/burst rifles with a barrel O.D. of .875″ or less. No need to remove gas block/sight Mfg: Osprey Defense SPECS: Steel, black oxide finish. Handguard Reinforced polymer composite, black. Kit includes preassembled piston assembly, bolt carrier, handguard, and instructions. Carbine fits 11 1/2″ to 16″ barrels with .875″ O.D. or smaller, and carbine-length gas system. Rifle fits

Click Here to Buy Now

We found a great deal on the Ruger Sight, Rear, Complete, Blue for only $12.99 at Brownells.

Sight, Rear, Complete, Blue Mfg: Ruger

Click Here to Buy Now