| () |
|---|
We found a great deal on the Interarms Ak-47 Parts for only $9.99 at Brownells.
Keep your AK-47 or variant in top shooting condition with these high quality parts. Will fit the many variants of the AK-47 including Soviet, Soviet Bloc and Chinese made rifles. Parts are caliber-specific to 7.62x39mm. SPECS: Steel, blue, matte finish unless otherwise indicated.
| () |
|---|
We found a great deal on the Brownells Ar-15/M16/M4 Springs for only $3.99 at Brownells.
Put the zing back into the rifle you thought was past its prime. Manufactured to precise tolerances, these high quality, replacement springs help keep your AR-15 functioning properly. Great for emergency spares or for assembling a parts rifle. Available singly, or in 3-paks. SPECS: Materials and finish at least equal to OEM parts. Chrome silicon springs indicated by (CS).
| () |
|---|
We found a great deal on the Egw Ar-15/M16 Space Comp for only $89.99 at Brownells.
Machined steel compensator has four equally spaced vents on each side that redirect combustion gases upward and to the sides for a significant reduction in felt recoil. Helps you keep the muzzle down and the sights on the target for faster follow-up shots and smaller groups. Solid bottom prevents kicking up ground debris when shooting prone, while solid top keeps muzzle flash and venting gas from obstructing your view of target. Models available to fit rifles chambered in .223/5.56mm, .308/7.62mm, and 9mm. Precision machined from carbon steel bar stock, with a hard, matte black Parkerized finish that resists heat, scratches, and abrasion. Legal for USPSA Limited Division competition. SPECS: Carbon steel, Parkerized, matte black finish. 2″ (5.1cm) long, .990″ (2.5cm) O.D. 3.4 oz. (96.4g) weight. .223/5.56mm “-28 thread. .308/7.62mm 5/8″-24 thread. 9mm “-36 thread. Gunsmith installation recommended.
| () |
|---|
We found a great deal on the Tm Solutions Bore Cleaners for only $5.99 at Brownells.
The TM Bore Cleaning Solvent is a revolutionary firearm cleaning solvent that is formulated to quickly and efficiently dissolve carbon, lead, plastic residue and all manner of powder fouling. It then offers effective removal of tough copper fouling, without an unpleasant smell many other solvents produce. It is ammonia free, brush compatible, non-petroleum based, and water soluble for easy clean up. This high quality cleaner works extremely well on centerfire and rimfire rifles, handguns, shotguns, and muzzleloaders in any caliber. Available in 4 or 8 oz. bottles.
| () |
|---|
We found a great deal on the Wilson Combat Rifle Shok-Buf for only $14.99 at Brownells.
High-density, polyurethane pads eliminate metal-to-metal contact and protect your semi-auto rifle receiver from damage. SPECS: Polyurethane rubber, blue. #411 fits Ruger Mini-14 and Mini-30, #413 fits AK-47/MAK. #438 fits M14/M1A.
| () |
|---|
We found a great deal on the Blue Force Gear Universal Wire Loop for only $19.99 at Brownells.
Nylon-coated, stainless steel cable with permanently attached sling loop provides simple, easy-to-install, ambidextrous sling attachment on any rifle or shotgun. Thread around barrel and forend, through buttstock swivel studs, or through front sight towers to create an instant, no-gunsmithing sling attachment point. Lightweight yet strong aluminum loop accepts slings up to 1 ” wide. Stainless steel shank ends can’t pull loose, while nylon coating on cable prevents damage to firearm and muffles unwanted sound. Short and Long lengths let you choose the length that fits best fits your application. SPECS: 6061 T6 aluminum billet, hardcoat anodized, and stainless steel wire cable, nylon coated, black. Short – 3 ” (8.2cm) O.A.L. Long – 6 ” (15.8cm) O.A.L.
| () |
|---|
We found a great deal on the Choate Ultimate Sniper Folder for only $284.99 at Brownells.
New, hi-tech folding stock combines portability with ruggedness to provide a handy, stable platform for accurate, long range shooting. Hinged buttstock provides a compact, 15 ” long stock when folded to ensure ease of maneuverability and transport in vehicles. Molded-in, aluminum V-block with socket head action screws provides a solid stock-to-action fit with little to no additional bedding required. High comb helps provide a good cheekweld and proper line of sight when using scopes. Pistol grip and flat-bottom forend feature stippling for a positive hold in all weather conditions. SPECS: DuPont Rynite SST-35, O.D. green. 25-3⁄8″ (64.5cm) long open, 15 ” (39.3cm) folded. 3.5 lb. (1.6kg) weight. Fits Savage short action rifles with factory heavy barrel.
| () |
|---|
We found a great deal on the The Custom Shop (Tcs) O-Ring Cleaning Jags for only $10.95 at Brownells.
Solid aluminum jags with rubber O-rings are ideal for cleaning the bore of your gun without worrying about performance reducing scratches. O-rings press patch firmly into bore surface for efficient cleaning action on powder, lead, copper, and plastic fouling. For use with patches, steel wool, and bronze wool. Shotgun and Black Powder jags are color coded; Rifle/Handgun jags are numbered for easy identification. SPECS: Aluminum with rubber O-rings. Shotgun – Anodized, red (12 ga.), blue (20 ga.), and green (28 ga.). 5⁄16″ -27 tpi male. Rifle/Handgun – Polished finish except .50 cal. Black Powder (BP) is anodized yellow. 8-32 tpi male except .50 BP is 10-32 tpi male.
| () |
|---|
We found a great deal on the Brauer Leather Lace-On Recoil Pad for only $22.01 at Brownells.
Loosen the laces and this recoil-absorbing pad comes right off with no alteration or damage to your rifle’s buttstock. Made from top-grain cowhide so only soft, supple leather touches your face or your rifle. Extends the stock by only 3/8″ and weighs less than 3 ounces. SPECS: Tanned cowhide, smooth texture, cordovan color. Nylon laces, brass eyelets. 4″ (10cm) long. Available in Small – 4- ” (12cm), Medium – 5″ (12.7cm), Large – 5- ” (14cm). Measure height at buttstock and order by size.
| () |
|---|
We found a great deal on the Magpul Ar-15/M16 Moe Upgrade Kit for only $119.99 at Brownells.
Convenient kits contain everything needed to fit an AR-15/M16 carbine with durable, lightweight, ergonomically enhanced Magpul Original Equipment (MOE) tactical stock furniture. Affordable MOE system improves operator comfort and weapon control for quick target engagement, fast follow up shots, and speedy transition to the next target. Strong A-frame buttstock offers a wide comb for an excellent cheekweld, protected heavy duty release lever for fast length-of-pull changes, and attachment points for both web slings and single-point clip-on slings. Two-piece, snap-on MOE handguard’s trapezoidal cross-section, deep grasping ridges on the underside, side extensions, and pronounced lip at the front edge help the operator maintain a secure grip under stress or during sustained rapid fire. Integral aluminum heat shield protects hand from hot barrel, while horizontal slots at the 2, 6, and 10 o’clock positions accept Falcon Industries bolt-on Picatinny accessory rails, available separately. Aggressively textured pistol grip provides a secure, non-slip grasp, with a curved beavertail that fills the grip-to-receiver junction to protect the web of the hand during sustained fire. MOE triggerguard’s shallow “V” shape provides extra clearance for a shooter wearing gloves and eliminates the gap at the rear of the USGI guard that can trap or pinch finger. All components are constructed of rugged, heat- and impact-resistant fiberglass-reinforced injection-molded polymer with molded-in reinforcements at critical stress points. Installs in minutes and require no permanent alterations to gun; remove MOE components and reinstall original parts any time. Sets available in black, and three popular colors, Dark Earth, O.D. Green, and Foliage Green. Mil-Spec fits 1.14″ O.D. buffer tubes on Colt-manufactured M4 and similar mil-spec tubes. Universal fits larger, 1.17″ O.D. commercial carbine buffer tubes. SPECS: Reinforced molded polymer, Black, Dark Earth, O.D. Green, or Foliage Green. Fits AR-15/M16/M4 rifles with buffer tube for M4-style adjustable buttstock, carbine-length gas system, Delta ring, and standard A2 gas block/front sight base. Buffer tube, carbine buffer, receiver extension nut, and carbine-length action spring not included. Mil-Spec fits rifles with mil-spec 1.14” O.D. buffer tubes. Universal fits rifles with commercial 1.17” O.D. buffer tubes.
